GTA:BLKN

[POMOC] Kuce

Započeo .ılllı. Wlseco .ılllı.
•1. Jan. 2013.• Zaključano
467
pregleda
10
postova
wlseco
4
.ılllı. Wlseco .ılllı.
Shot Caller
1. Jan. 2013.
#1
Skripta koju koristim: Moja
Detaljan opis problema: Pa znaci ja napravim kuce al ih ne ucitava a bas sam ih radio po ovom dolje
Dio skripte:evo dio LoadProperty 
public LoadProperty()
{
	new arrCoords;
	new strFromFile2;
	new File: file = fopen("property.cfg", io_read);
	if (file)
	{
		new idx;
		while (idx < sizeof(HouseInfo))
		{
			fread(file, strFromFile2);
			split(strFromFile2, arrCoords, ',');
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo hEntrancez %f",HouseInfo);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
  	        if(HouseInfo == 457)
			{
				HouseInfo = 411;
			}
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo:%d Owner:%s hTakings %d hVec %d",idx,HouseInfo,HouseInfo,HouseInfo);
			idx++;
		}
		printf(": Loaded %d Houses", idx);
		fclose(file);
	}
	return 1;
}

Neke slike/video za lakse dobivanje pomoci(neobavezno):
Vuzimir
5
Vuzimir
Kingpin
1. Jan. 2013.
#2
imas li pod OnGameModeInit ovo: 
LoadProperty();
wlseco
4
.ılllı. Wlseco .ılllı.
Shot Caller
1. Jan. 2013.
#3
|SE|Vuzimir wrote on January 1, 2013, 9:37 am:
imas li pod OnGameModeInit ovo: 
LoadProperty();
da
Vuzimir
5
Vuzimir
Kingpin
1. Jan. 2013.
#4
dali onda imas kada otvoris Scriptfiles 
property.cfg
?
wlseco
4
.ılllı. Wlseco .ılllı.
Shot Caller
1. Jan. 2013.
#5
|SE|Vuzimir wrote on January 1, 2013, 9:48 am:
dali onda imas kada otvoris Scriptfiles 
property.cfg
?
lol normalno da imam di bi pravio kuce ?
Vuzimir
5
Vuzimir
Kingpin
1. Jan. 2013.
#6
ωℓѕє¢σ.ρωη™ wrote on January 1, 2013, 9:48 am:
dali onda imas kada otvoris Scriptfiles 
property.cfg
?
lol normalno da imam di bi pravio kuce ?

probaj ovako: 
public LoadProperty()
{
	new arrCoords;
	new strFromFile2;
	new File: file = fopen("property.cfg", io_read);
	if (file)
	{
		new idx;
		while (idx < sizeof(HouseInfo))
		{
			fread(file, strFromFile2);
			split(strFromFile2, arrCoords, ',');
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo hEntrancez %f",HouseInfo);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
  	        if(HouseInfo == 457)
			{
				HouseInfo = 411;
			}
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo:%d Owner:%s hTakings %d hVec %d",idx,HouseInfo,HouseInfo,HouseInfo);
			idx++;
		}
		printf(": Loaded %d Houses", idx);
		fclose(file);
	}
	return 1;
}
wlseco
4
.ılllı. Wlseco .ılllı.
Shot Caller
1. Jan. 2013.
#7
|SE|Vuzimir wrote on January 1, 2013, 9:48 am:
dali onda imas kada otvoris Scriptfiles 
property.cfg
?
lol normalno da imam di bi pravio kuce ?

probaj ovako: 
public LoadProperty()
{
	new arrCoords;
	new strFromFile2;
	new File: file = fopen("property.cfg", io_read);
	if (file)
	{
		new idx;
		while (idx < sizeof(HouseInfo))
		{
			fread(file, strFromFile2);
			split(strFromFile2, arrCoords, ',');
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo hEntrancez %f",HouseInfo);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
  	        if(HouseInfo == 457)
			{
				HouseInfo = 411;
			}
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo:%d Owner:%s hTakings %d hVec %d",idx,HouseInfo,HouseInfo,HouseInfo);
			idx++;
		}
		printf(": Loaded %d Houses", idx);
		fclose(file);
	}
	return 1;
}

neradi
Vuzimir
5
Vuzimir
Kingpin
1. Jan. 2013.
#8
ωℓѕє¢σ.ρωη™ wrote on January 1, 2013, 9:48 am:
dali onda imas kada otvoris Scriptfiles 
property.cfg
?
lol normalno da imam di bi pravio kuce ?

probaj ovako: 
public LoadProperty()
{
	new arrCoords;
	new strFromFile2;
	new File: file = fopen("property.cfg", io_read);
	if (file)
	{
		new idx;
		while (idx < sizeof(HouseInfo))
		{
			fread(file, strFromFile2);
			split(strFromFile2, arrCoords, ',');
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo hEntrancez %f",HouseInfo);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
  	        if(HouseInfo == 457)
			{
				HouseInfo = 411;
			}
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo:%d Owner:%s hTakings %d hVec %d",idx,HouseInfo,HouseInfo,HouseInfo);
			idx++;
		}
		printf(": Loaded %d Houses", idx);
		fclose(file);
	}
	return 1;
}

neradi

E nzm ni ja vise do cega je...Jedino sto ti mogu reci je: Sry sto sam ti trosio vrijeme i potrazi nekoga ko bih mogao znati  do cega je 🙂
wlseco
4
.ılllı. Wlseco .ılllı.
Shot Caller
1. Jan. 2013.
#9
|SE|Vuzimir wrote on January 1, 2013, 9:48 am:
dali onda imas kada otvoris Scriptfiles 
property.cfg
?
lol normalno da imam di bi pravio kuce ?

probaj ovako: 
public LoadProperty()
{
	new arrCoords;
	new strFromFile2;
	new File: file = fopen("property.cfg", io_read);
	if (file)
	{
		new idx;
		while (idx < sizeof(HouseInfo))
		{
			fread(file, strFromFile2);
			split(strFromFile2, arrCoords, ',');
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = floatstr(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo hEntrancez %f",HouseInfo);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			strmid(HouseInfo, arrCoords, 0, strlen(arrCoords), 255);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
  	        if(HouseInfo == 457)
			{
				HouseInfo = 411;
			}
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			HouseInfo = strval(arrCoords);
			//printf("HouseInfo:%d Owner:%s hTakings %d hVec %d",idx,HouseInfo,HouseInfo,HouseInfo);
			idx++;
		}
		printf(": Loaded %d Houses", idx);
		fclose(file);
	}
	return 1;
}

neradi

E nzm ni ja vise do cega je...Jedino sto ti mogu reci je: Sry sto sam ti trosio vrijeme i potrazi nekoga ko bih mogao znati  do cega je 🙂
ma nema veze ako neko zna nek kaze
wlseco
4
.ılllı. Wlseco .ılllı.
Shot Caller
2. Jan. 2013.
#10
Izgleda kad pokrenem mod da se izbrisu kuce sta da radim omg

Morate biti prijavljeni da biste odgovorili na ovu temu.

Prijava

© 2026 SmartShark. All rights reserved.

Powered by Momentum|v2026.3.001 Alpha