Započeo Obrisan korisnik
•5. Jun 2009.Mala Pomoc
1,440
pregleda
4
postova
5. Jun 2009.
Znam da zvuci malo njubasto ali interesuje me sta mu ga ovo znaci .. nikak nemrem da skuzim u cemu je poenta posto jedan dio radi drugi ne eh pogle ovo :
Scriptu sam uzeo od jednog lika trebalo mi je samo par stvari ovo je ionako za zezanciju na mom test serveru ..
Problem je u ovom kad idem compile sve je ok sem ovog gore navedenog djela ..
Error:
Znam da znate u cemu je problem ja sam ipak pocetnik u scriptanju .. pls postajte odgovor . Thx !
// - Pickups
skydive = CreatePickup(122,1230.6877,-807.8174,1084.0078,354.7905); // ukradicash info icon
fenter = CreatePickup(1239, 1, 1596.4839,-1032.8760,23.9063); // Fair Fun Entrance
gondolai = CreatePickup(1239, 1, 1598.6445,-1021.6472,24.1943); // Gondola
gondolad = CreatePickup(1239, 1, 1598.742,-1019.515,100.124);
food1 = CreatePickup(122,1277.5082,-813.7712,1085.6328,94.7212); // sladoled info icon
trava = CreatePickup(122,1292.5183,-827.5148,1086.0076,56.2790); // trava info icon
pice = CreatePickup(122,1254.4255,-790.5550,1084.0078,172.6716); // bar info icon
box = CreatePickup(122,1234.1415,-766.7949,1084.0078,356.3101); // box info icon
return 1;
}Scriptu sam uzeo od jednog lika trebalo mi je samo par stvari ovo je ionako za zezanciju na mom test serveru ..
Problem je u ovom kad idem compile sve je ok sem ovog gore navedenog djela ..
Error:
C:\DOCUME~1\pc\Desktop\FairFun.pwn(76) : warning 213: tag mismatch
C:\DOCUME~1\pc\Desktop\FairFun.pwn(80) : warning 213: tag mismatch
C:\DOCUME~1\pc\Desktop\FairFun.pwn(81) : warning 213: tag mismatch
C:\DOCUME~1\pc\Desktop\FairFun.pwn(82) : warning 213: tag mismatch
C:\DOCUME~1\pc\Desktop\FairFun.pwn(83) : warning 213: tag mismatchZnam da znate u cemu je problem ja sam ipak pocetnik u scriptanju .. pls postajte odgovor . Thx !
6. Jun 2009.
Koristiš kordinatu umjesto spawn tipa.
Parameters:
CreatePickup(model, type, Float:X, Float:Y, Float:Z)
model The model ID you'd like for the pickup.
type The pickup spawn type, see further down this page.
Float:X The X-coordinate for the pickup to show.
Float:Y The Y-coordinate for the pickup to show.
Float:Z The Z-coordinate for the pickup to show.
Returns The PickupID.
Available Pickup Types:
0 The pickup does not display.
1 Not pickupable, exists all the time.
2 Pickupable, respawns after some time.
3 Pickupable, but doesn't respawn.
4 Disappears shortly after created (perhaps for weapon drops?)
5 Disappears shortly after created (perhaps for weapon drops?)
8 Pickupable, but has no effect. Disappears automatically.
11 Blows up a few seconds after being created (bombs?)
12 Blows up a few seconds after being created.
13 Slowly decends to the ground.
14 Pickupable, but only when in a vehicle. Falls through objects made with CreateObject, etc.
15 Pickupable, but doesn't respawn.
19 Pickupable, but has no effect (information icons?)
22 Pickupable, but doesn't respawn.
23 Pickupable, but doesn't disappear on pickup.
Parameters:
CreatePickup(model, type, Float:X, Float:Y, Float:Z)
model The model ID you'd like for the pickup.
type The pickup spawn type, see further down this page.
Float:X The X-coordinate for the pickup to show.
Float:Y The Y-coordinate for the pickup to show.
Float:Z The Z-coordinate for the pickup to show.
Returns The PickupID.
Available Pickup Types:
0 The pickup does not display.
1 Not pickupable, exists all the time.
2 Pickupable, respawns after some time.
3 Pickupable, but doesn't respawn.
4 Disappears shortly after created (perhaps for weapon drops?)
5 Disappears shortly after created (perhaps for weapon drops?)
8 Pickupable, but has no effect. Disappears automatically.
11 Blows up a few seconds after being created (bombs?)
12 Blows up a few seconds after being created.
13 Slowly decends to the ground.
14 Pickupable, but only when in a vehicle. Falls through objects made with CreateObject, etc.
15 Pickupable, but doesn't respawn.
19 Pickupable, but has no effect (information icons?)
22 Pickupable, but doesn't respawn.
23 Pickupable, but doesn't disappear on pickup.
6. Jun 2009.
Eee hvala matejdz .. za type i model nisam znao ja kontao treba samo koo unjet 😉 thx jos jednom
Ovde LOCK
Ovde LOCK
Morate biti prijavljeni da biste odgovorili na ovu temu.
Prijava